Screen Protector Installation

Watch the installation video HERE

1. Use the metal scraper to carefully pry off the old screen protector starting from a corner.
2. Remove the old screen protector.
3. Use the yellow rubber finger covers to prevent contamination.
4. Use the cleaning cloth in the black wrapping to remove the old adhesive from the display screen.
5. Let the display dry for a minimum of 30 seconds.
6. Prep the display screen using the alcohol wipe marked "1".
7. Follow up by buffing the clean display with the dry wipe marked "2".
8. Remove the rubber finger covers and get the new screen protector and the cloth-covered squeegee.
9. While holding the new screen protector by the edges, peel off and remove the film with the blue tab.
10. Align the exposed side of the screen protector on the display, starting from the bottom.
11. Once aligned, install the screen protector by pressing the bottom in place and then using the squeegee
    to apply smooth pressure to the rest of the screen protector in one single upward movement.
12. Ensure the film is evenly pressed onto the display and remove any bubbles with the cloth-covered squeegee
13. Complete the installation by pulling the small clear tab and removing the clear outer cover film.